Search Results for: 500-425 Studienmaterialien: Cisco AppDynamics Associate Administrator - 500-425 Zertifizierungstraining 🕴 Suchen Sie jetzt auf [ www.itzert.com ] nach ➥ 500-425 🡄 und laden Sie es kostenlos herunter 🥺500-425 Originale Fragen

2192.0613 Cohline Carburettor – Fuel injection hose 7mm bore

Cohline type 2192 Fuel injection hose with middle permeation.

7mm bore x 13mm outer diameter.

Inside layer NBR, Textile brading, Outer layer CR (Abrasion resistant rubber) DIN 73379-2A (edition 11/97)

  • Working pressure 6Bar
  • Testing pressure 20Bar
  • Burst pressure 30bar
  • Minimum bend radius 70mm

Suitable for commercial fuel including Super grades and E10.

Sold per meter, max continous length 20mtr

 

 

PPO201 Twin Weber 40 IDF Porsche 356/912 kit

Performance kit to allow fitment of 2 x genuine Spanish Weber 40IDF carburettors to replace the original Solex carburettors on Porsche 356 and 912.

The carburettors come jetted with the following spec:

  • 32mm Chokes
  • 125 Main jets
  • 180 Air correctors
  • F11 Emulsion tubes
  • 55 Idle jets
  • 50 Pump jets

Kit contains:

  • 2 x Genuine Weber 40 IDF carburettors (no starter)
  • 2 x 83mm Air filters
  • Porsche style levers
  • Manifold adaptors and fittings
  • Weber tuning manual
  • Base and air filter gaskets

PVO201-45 Twin Weber 45 DCOE carburettor kit Volvo B18/20

A Weber performance kit to allow fitment of 2 x Genuine Spanish Weber 45DCOE carburettors to the Volvo B18/20 engines.

The carburettors come with a stock jetting found here: 19600.060

Kit contains:

  • 2 x Weber 45DCOE carburettors
  • 1 x Intake Manifold
  • 1 x  linkage set
  • Softmounts, studs, nuts, washers etc.

Dellorto PHBL Rubber manifold 30mm

Rubber flange manifold to suit carburettors with an external fitting diameter of 29-31mm, including the Dellorto PHBL.

Comes with internal bead to suit some carburettors and external lip (see separate pictures below) which can be easliy removed if not required.

  • Internal bore 30mm.
  • Total depth including flange 26mm (excluding engine side lip)
  • Thickness of flange plate 7.3mm
  • Bolt hole spacing 60mm centre to centre
  • Fixing holes 8.5mm diameter.

15290.527 Weber 34ICH Transit 2L – 1986 onwards

Weber 34 ICH replacement carb kit to suit Ford Transit 2 Ltr, 1986 onwards.

If you have a Transit 2 ltr from between 1981 and 1986, then you would need this carb.

Replaces Ford VV carburettor.

Kit comes with:-

  • Weber 34ICH carburettor
  • Manifold mounting adaptor
  • Air filter clamp
  • In line fuel filter
  • Choke cable
  • Fuel pipe
  • Full fittings kit & instructions

Standard jetting :-

  • 29mm choke(fixed)
  • 3.5 Auxiliary venturi
  • 165 Main jet
  • 50 Idle jet
  • 190 Air corrector
  • 55 Pump jet
  • F6 Emulsion tube
  • 175 Needle valve

2122.0600 Cohline Carburettor – Braided Fuel Hose 7.5mm

Cohline type 2122 Braided fuel injection hose with middle permeation.

7.5mm bore x 15mm outer diameter

Inside layer NBR, Textile brading, Outer layer CR (Abrasion resistant rubber) DIN 73379-2A (edition 11/97)

  • Working pressure 7 Bar
  • Testing pressure 20 Bar
  • Burst pressure 30 Bar
  • Minimum bend radius 50 mm

Suitable for commercial fuel including Super grades and E10.

Sold per meter, max continous length 20mtr

53157 Dellorto VHSH VHSB VHSC Variable main jet kit

Adjustable Dell’orto main jet for VHSH VHSB VHSC carburettors, replaces existing float bowl nut.

Length 29cm outside carb.

Supplied with:-

3 adjustable main jets – sizes 200, 220 & 250, which effectively covers the standard main jet range from 140 to 190, please see PDF for details.

Comes with all parts shown in the picture:-

  • Float bowl nut/adaptor
  • Adjustable needle cable assembly.
  • Needle return spring.
  • 3 sizes of main jet replacements.

View 53157

PFO200 Twin Weber 45 DCOE carburettor kit Ford Zetec

A Weber performance kit to allow fitment of 2 x Genuine Spanish Weber 45DCOE carburettors to the Ford Zetec engine.

Modified by Webcon, these 5 progression hole DCOE 45s are ideally suited to Ford Zetec and Duratec 16V engines and will smooth out the flat spots found between idle and the main jet progression phase when using 3 or 4 hole carbs.

The carburettors come with a stock jetting found here: 19600.06201

Kit contains:

  • 2 x Weber 45DCOE carburettors
  • 1 x Intake Manifold
  • 1 x Twin cable linkage
  • Soft mounts, studs, nuts, washers etc.