Float needle valve and seat to suit motorcycle and DRLA applications.
Beware of cheap imitations – Look for the Dell’orto Diamond “INC” logo
These are genuine Dellorto parts with a spring loaded viton tipped needle and crossed drilled seats.
Each valve set comes with viton tipped needle valve, seat and fibre washer.
(9valve drlavalve phbevalve)
Cohline stainless over braid 7.5mm bore x 15mm fuel injection hose
Inside layer NBR, Textile brading, Outer layer CR (Abrasion resistant rubber) DIN 73379-2A (edition 11/97) with Stainless Steel braiding.
Suitable for commercial fuel including Super grades and E10.
Sold per meter, max continous length 20mtr
A fuel line kit featuring:
Fuel line specifications:
Cohline type 2240 Fuel hose with low permeation.
5.5mm bore x 11.5mm outer diameter.
Inside FPM/ECO, aramid brading inside, Outside ECO (abrasion resistant outer rubber layer)
DIN 73379-3E (edition 11/97)
Suitable for commercial fuel including ethanol and Bio-diesel consisting of Rapeoilmethylester (RME Fuels)Â and E10.
Temperature range -40° to 125 °C, short term upto 140 °C
Good quality chrome plated steel air filter.
Dimensions 170 x 113 x 63mm deep.
Fits:- Weber DIF, DFV, DFEV and DFAV carburettors.
Not suitable for Weber 40DFAV carburettors.
Comes with air filter gasket, breather elbow & fixings.
Cohline stainless over braid 6mm x 13mm fuel injection hose
6mm bore x 13mm outer diameter
Inside layer NBR, Textile brading, Outer layer CR (Abrasion resistant rubber) DIN 73379-2A (edition 11/97) with Stainless Steel braiding.
Suitable for commercial fuel including Super grades and E10.
Sold per meter, max continous length 20mtr
A fuel line kit featuring:
Fuel line specifications:
Cohline type 2192 Fuel injection hose with middle permeation.
6mm bore x 12mm outer diameter.
Inside layer NBR, Textile brading, Outer layer CR (Abrasion resistant rubber) DIN 73379-2A (edition 11/97)
Suitable for commercial fuel including Super grades and E10.
Good quality chrome plated steel air filter.
Dimensions 170 x 113 x 65mm deep.
Fits:-
Weber DGV, DGAV, DGAS & DGMS.
Comes with air filter gasket, breather elbow & fixings.
A wide bellmouth/air filter adapter/airbox adapter commonly supplied as standard on Dell’Orto PHBH Carburettors.
Trumpet dimensions:
Revitalize your classic performance with our aftermarket replacement for the Dell’orto DHLA45 carburettor!
With the Dellorto factory ceasing production of the DHLA carburettor in the mid-90s, finding a new, high-quality replacement has become increasingly difficult and expensive. That’s where we come in. Our premium aftermarket replacement for the DHLA45 is here to breathe new life into your beloved vehicle.
Standard jetting:
We can jet to any spec, please mention details with your order or contact us for advice.
Perfect for restorations and upgrades!
Whether you’re restoring a classic or upgrading for enhanced performance, our aftermarket Dell’orto DHLA45 replacement offers an exceptional balance of quality and value. Don’t let the scarcity of original parts hold you back. Rediscover the joy of driving with a carburettor that performs as intended and keeps your engine purring like new.
Fully assembled Webcon twin Weber 44IDF kit to suit the Ford 2.0 OHC engine.
Genuine Weber, made in Spain, not a cheap Chinese copy.
These carburettors have not got a starting mechanism (choke) fitted, but are fitted with a blanking plate instead. The carburettors also have had their spindles and levers modified by Weber to allow them to fit onto the manifold.
Featuring a custom manufactured intake manifold and genuine Spanish Weber carburettors, PFO204 is a great looking and great performing upgrade for your Pinto. The kit also comes with a Weber tuning manual and cable bracket.
The levers used in this fitment can be purchased separately and can be found here: 45048.078Â & 99903.939.
