Weber 34 ICH replacement carb kit to suit Ford Transit 2 Ltr V4 models manufactured between 1967 – 1976
If you have a Transit 2 ltr from between 1981 and 1986, then you would need this carb.
If you have a Transit 2 ltr from after 1986, then you would need this carb.
If you have a Transit 1.7 ltr v4 model between 1967 and 1976, then you would need this carb.
Replaces Ford IV carburettor.
Kit comes with:-
- Weber 34ICH carburettor
- Manifold mounting adaptor
- Fuel pipe
- Full fittings kit & instructions
- Air filter
Standard jetting :-
- 29mm choke(fixed)
- 3.5 Auxiliary venturi
- 165 Main jet
- 50 Idle jet
- 190 Air corrector
- 55 Pump jet
- F6 Emulsion tube
- 175 Needle valve
This kit is designed to allow removal of the cold start/choke functionality of the DCOE carburettor.
The requirement to do this is commonplace in situations where the engine can be warmed properly before use, typically off road or track day use, where the user wants to simplify the carburettor operation and reduce the chance of fuel leakage in extreme operating conditions.
Full installation instructions are included.
Good quality brand new stainless steel air filter, the same size as K&N small oval units.
Oval dimensions 180 x 118mm, 100mm deep.
Will fit:-
- DellOrto DHLA 40,45 and 48
- Weber DCOE 38,40,42,45 and 48 ( Note – hole size for trumpet is 48mm, which may need modification for slot in trumpets )
- Solex ADDHE.
Comes with air filter gasket.
Note – not suitable for use with full radius rampipes.
Good quality brand new stainless steel air filter, the same size as K&N small oval units.
Oval dimensions 178 x 118mm,
83mm deep.
Height above top fixing stud 30mm
Depth of filter below bottom fixing stud 25mm
Up to 60mm long trumpets/stacks can be fitted inside these for optimum air flow, power and torque.
Will fit:-
- DellOrto DHLA 40,45 and 48 Weber
- DCOE 38,40,42,45 and 48 (Note – hole size for trumpet is 48mm, which may need modification for slot in trumpets )
- Solex ADDHE.
Comes with air filter gasket.
Note – not suitable for use with full radius rampipes.
(dhlafilter) (dcoefilter)
This kit features a Weber 4 barrel downdraught carburettor and dual plane induction manifold.
The conversion has been developed for improved engine torque and fuel economy. Although calibrated for Range Rover 3.5 and 3.9 models, it is also suitable for many other Rover V8 applications, and for those wishing to carry out engine tuning modifications.
For applications other than 3.5 or 3.9Â ltr, calibration changes and/or adjustments may be required.
Please note that this is the only official Webcon 4 barrel kit for the Rover V8. There are a number of “Grey” importers supplying similar looking products, however these have not been tested or verified by Webcon.
This conversion can be carried out by a competent D.I.Y mechanic with a basic tool kit. The kit comes complete with detailed fitting instructions covering varying models.
The kit comprises of:
- Carburettor
- Manifold
- Air Filter
- Throttle Linkage*
- Fuel Line connections and Fuel Filter
- Engine breather / pulse air system
- Hose connections
- All necessary gaskets, seals and fixtures
*NB. Automatic transmission vehicles will require supplementary kick down linkage kit – Part Number LP8000.
Supplied by Webcon UK Good quality brand new pre -oiled chrome plated steel air filter, the same size as K&N small oval units.
Oval dimensions 182 x 120mm, 45mm deep.
Height of filter above top fixing stud 30mm
Depth of filter below bottom fixing stud 25mm
NOTE – Trumpets cannot be fitted inside this air filter.
Will fit:-
- DellOrto DHLA 40,45 and 48
- Weber DCOE 38,40,42,45 and 48
- Solex ADDHE.
- Comes with air filter gasket and nyloc fixings.
(dhlafilter) (dcoefilter)
Good quality brand new stainless steel air filter, the same size as K&N small oval units.
Oval dimensions 180 x 118mm, 63mm deep.
Will fit:-
- DellOrto DHLA 40,45 and 48
- Weber DCOE 38,40,42,45 and 48 ( Note – hole size for trumpet is 48mm, which may need modification for slot in trumpets )
- Solex ADDHE.
Comes with air filter gasket.
Note – not suitable for use with full radius rampipes.
(dhlafilter) (dcoefilter)
A Weber performance kit to allow fitment of 2 x Genuine Spanish Weber 45DCOE 4 progression hole carburettors to BMW M10 2000/2002 engines,
E28 518
E30 318
E21 320
The carburettors come with a stock jetting found here: 19600.062
Kit contains:
- 2 x Weber 45DCOE carburettors
- 1 x Intake Manifold MW4810B
- 1 x Competition twin cable linkage set
- Soft mounts, studs, nuts, washers etc.
Genuine Weber, made in Spain, not a cheap Chinese copy
This carburettor is fitted with a manually operated (cable) cold start mechanism (choke), Cable not included.
Kit contains:
- Genuine Spanish Weber 32/36 DGV auto choke carburettor
- Inlet manifold
- Linkage kit
- Air filter
The carburettors come with a stock jetting which should be a good starting point – found here: 22680.005
Custom Speed Parts safety-cut-out relay.
This relay allows the electric fuel pump to be automatically switched off when, e.g. in the event of an accident, the engine stops and the ignition remains switched on.
This device also protects the fuel pump against damage (risk of overheating), which can occur when the engine stops, but the ignition is on.
Comes with relay plus socket, universal wiring loom.
Note, This relay will cut the power to the pump, but if your fuel pump is the type that will allow fuel to flow through it when its not running fitting a solenoid like SOL002 may also be required.
Fitting instructions : CSP11-Relay-Information