Pipercross Unique Performance Panel Filter
Height 377mm x Internal 108.5mm
Suitable for:-
| BMW |
1 Series (E81/E82/E87/E88) |
118d |
09/04 – 02/07 |
| BMW |
1 Series (E81/E82/E87/E88) |
120d |
09/04 – 02/07 |
| BMW |
3 Series (E46) |
318d / td |
09/01 – 09/05 |
| BMW |
3 Series (E46) |
320d (136bhp) |
05/98 – 09/01 |
| BMW |
3 Series (E46) |
320d (150bhp) |
09/01 – |
| BMW |
3 Series (E46) Compact |
320td Compact |
08/01 – 07/04 |
| BMW |
3 Series (E90/E91/E92/E93) |
318d |
09/05 – 08/07 |
| BMW |
3 Series (E90/E91/E92/E93) |
320d (163bhp) |
03/05 – 08/07 |
| BMW |
5 Series (E39) |
520d (136bhp) |
02/00 – 06/02 |
| BMW |
5 Series (E39) |
520d (150bhp) |
06/02 – 07/04 |
| BMW |
5 Series (E60/E61) |
520d |
09/05 – 08/07 |
| BMW |
X3 (E83) |
2.0 d |
09/04 – 08/07 |
| Land Rover |
Freelander |
2.0 TD4 |
11/00 – |
| MG |
ZT |
2.0 CDTi (115bhp) |
06/02 – 09/03 |
| MG |
ZT |
2.0 CDTi (131bhp) |
02/03 – |
| Rover |
75 |
2.0 CDT |
04/99 – |
| Rover |
75 |
2.0 CDTi |
02/03 – |
Note – The spindles do not have the centre hole drilled for the pump cam pin, this has to be done by the user.
Replaces 10005.425, 1000542500
Genuine Dell’Orto exhaust gas re-circulation valve for 1.6, 1.9, 2.0, and 2.2 litre engines on the list of cars below:
Fiat: Punto, Bravo, Idea, Sedici, Doblò, 500L, 500x
Alfa Romeo: Mito, Giulietta
Lancia: Delta, Musa
Saab: 9.3
Jeep: Cherokee, Renegade
Suzuki: SX4, Ccross, Vitara
OEM P/Ns: 55265385; 55209609; 55229740.
Non original part that can be used to replace fuel banjo p/n 5000.
Internal fuel filter 1435 cannot be used with this part.
Pipe size 6mm
Internal more 12mm
External depth 11.9mm
https://www.dellorto.co.uk/product-category/car-accessories/car-air-filters-trumpets/slot-in-weber-type-trumpets/
K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N Filtercharger elements providing a superior air filtration system.
When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric.
6.5 fl/oz 192ml Aerosol spray
Due to postal restrictions we can only send this to a UK address.
Cohline type 2192 Fuel injection hose with middle permeation.
12mm bore x 19mm outer diameter.
Inside layer NBR, Textile brading, Outer layer CR (Abrasion resistant rubber) DIN 73379-2A (edition 11/97)
- Working pressure 8Bar
- Testing pressure 20Bar
- Burst pressure 30bar
- Minimum bend radius 80mm
Suitable for commercial fuel including Super grades and E10.
Sold per meter, max continous length 20mtr
Twin Weber ICT34 carburettor kit including manifold adaptors to suit VW T25 watercooled installations. (Waterboxer)
- Genuine Weber 34 ICT carburettors – not Chinese copies Genuine Weber 34 ICT carburettors.
- EMPI hexagon bar linkage kit with metal rose joints and polished lever arms.
- CB performance  twin port manifolds with top and bottom gaskets, studs, nuts & washers.
- Manifold adaptor plates + gaskets
- Air filters
- Blanking caps for carburettor vacuum take-offs.
Jetted for 2.0L engine as standard, for other sizes please contact us before purchasing.
Kits do not come with unions or pipes for joining / blanking off the existing water pipes or vacuum servo, or for providing for a fuel return.
Due to increasing engine bay temperatures, especially with the extra heat created by the ethanol levels in modern fuels, and the inherently poor cooling system on an air cooled flat 4 engine, it is strongly recommended that insulation gaskets are used when fitting Weber conversions on these engines to minimize the chances of potential heat damage to the carburettors. The use of a fuel cut off solenoid is also advised, to avoid fuel syphoning into the engine due to the position of the fuel tank.
Cohline type 2240 Fuel hose with low permeation.
5.5mm bore x 11.5mm outer diameter.
Inside FPM/ECO, aramid brading inside, Outside ECO (abrasion resistant outer rubber layer)
DIN 73379-3E (edition 11/97)
- Working pressure 10Bar
- Testing pressure 20Bar
- Burst pressure 50bar
- Minimum bend radius 55mm
Suitable for commercial fuel including ethanol and Bio-diesel consisting of Rapeoilmethylester (RME Fuels)Â and E10.
Temperature range -40° to 125 °C, short term upto 140 °C
Sold per meter, max continous length 20mtr
Note:- there are several versions of this item, please look at all the variations before ordering.
The spring associated with this item is part number 8543, and is item 106 in the DHLA section. (it is not shown on the diagram)
Not all variations are still available.
