Rubber flange manifold to suit carburettors with an external fitting diameter of 34-36mm, including the Dellorto PHBH & VHSH
Comes with internal bead to suit some carburettors and external lip (see separate pictures below) which can be easliy removed if not required.
Internal bore 35mm.
Total depth including flange 25.8mm (excluding engine side lip)
Thickness of flange plate 7.3mm
Bolt hole spacing 60mm centre to centre
Fixing holes 8.5mm diameter.
Cohline type 2122 Braided Fuel injection hose with middle permeation.
6mm bore x 11mm outer diameter
Inside layer NBR, Textile brading, Outer layer CR (Abrasion resistant rubber) DIN 73379-2A (edition 11/97)
Suitable for commercial fuel including Super grades and E10.
Sold per meter, max continous length 20mtr
Combined air corrector and main emulsion tube holder for Weber DCOM carburettors.
A Weber performance kit to allow fitment of a Genuine Spanish Weber 45DCOE carburettor to the BMC A-series engine.
The carburettor comes with a stock jetting found here:Â 19600.060
It is also likely that the bulkhead / firewall will need some modification in an A-series transverse application like in a Mini.
Kit contains:
Rubber flange manifold to suit carburettors with an external fitting diameter of 29-31mm, including the Dellorto PHBL.
Comes with internal bead to suit some carburettors and external lip (see separate pictures below) which can be easliy removed if not required.
Cohline type 2192 Fuel injection hose with middle permeation.
7mm bore x 13mm outer diameter.
Inside layer NBR, Textile brading, Outer layer CR (Abrasion resistant rubber) DIN 73379-2A (edition 11/97)
Suitable for commercial fuel including Super grades and E10.
Sold per meter, max continous length 20mtr
Performance kit to allow fitment of 2 x genuine Spanish Weber 40IDF carburettors to replace the original Solex carburettors on Porsche 356 and 912.
The carburettors come jetted with the following spec:
Kit contains:
A Weber performance kit to allow fitment of a Genuine Spanish Weber DGMS carburettor to the Volvo B18/20 engines.
This kit offers an excellent balance of performance and economy, all at an extremely competitive price.
Please note: The photo used for this product shows a DGV carburettor – This kit comes with a DGMS carburettor.
Kit contains:
An M5 x 0.8mm pitch stud with a 5/16ths” (8mm) ball.
The ball and stud come with the appropriate M5 spring washer and nut.
For a ball and stud with a 1/4″ ball, click here: KC012
Cohline type 2122 Braided fuel injection hose with middle permeation.
7.5mm bore x 15mm outer diameter
Inside layer NBR, Textile brading, Outer layer CR (Abrasion resistant rubber) DIN 73379-2A (edition 11/97)
Suitable for commercial fuel including Super grades and E10.
Sold per meter, max continous length 20mtr
