Comes with Minarelli type plug
Search Results for: 500-425 Studienmaterialien: Cisco AppDynamics Associate Administrator - 500-425 Zertifizierungstraining 🕴 Suchen Sie jetzt auf [ www.itzert.com ] nach ➥ 500-425 🡄 und laden Sie es kostenlos herunter 🥺500-425 Originale Fragen
PMG102 Weber 45DCOE carburettor kit with manifold – MGB 1800 B series
A Weber performance kit to allow fitment of a Genuine Spanish Weber 45DCOE carburettor to the MG MGB 1800 B series engine.
The carburettor comes with a stock jetting found here: 19600.060
Kit contains:
- A genuine Weber 45DCOE carburettor
- 1 x Intake Manifold
- 1 x linkage set
- Soft mounts, studs, nuts, washers etc.
2192.0400 Cohline Carburettor – Fuel injection hose 6mm bore
Cohline type 2192 Fuel injection hose with middle permeation.
6mm bore x 12mm outer diameter.
Inside layer NBR, Textile brading, Outer layer CR (Abrasion resistant rubber) DIN 73379-2A (edition 11/97)
- Working pressure 6Bar
- Testing pressure 20Bar
- Burst pressure 30bar
- Minimum bend radius 50mm
Suitable for commercial fuel including Super grades and E10.
Sold per meter, max continuous length 20mtr
2134.01.1000 Cohline Carburettor – Stainless Steel Braided Fuel Hose 12mm
Cohline stainless over braid 12mm bore x 20mm fuel injection hose
Inside layer NBR, Textile brading, Outer layer CR (Abrasion resistant rubber) DIN 73379-2A (edition 11/97) with Stainless Steel braiding.
Suitable for commercial fuel including Super grades and E10.
Sold per meter, max continous length 20mtr
53078 Electric choke – Piaggio PHVA/PHVB
Comes with Piaggio type plug.
PVW205 Twin Weber 45 DCOE carburettor kit VW Golf 16v
A Weber performance kit to allow fitment of 2 x Genuine Spanish Weber 45DCOE carburettors to VW Golf 16v engines.
The carburettors come with a stock jetting found here:Â 19600.062
Kit contains:
- 2 x Weber 45DCOE carburettors
- 1 x Intake Manifold
- 1 x Webcon linkage set
- Softmounts, studs, nuts, washers etc.
In-line fuel pressure gauge kit
This kit comes complete with all the items shown so you can fit it inline to test the fuel pressure on your engine.
Suitable for engines using carburettors, range is 1-15PSI.
Not suitable for fuel injection
It is important to get the right pressure when running performance carbs – too much and they will flood.
Use gauge for setting up only – not designed for permanent fitment.
4053 Dellorto PHBE / PHB / PHBH / PHBL Short fuel union / banjo bolt
A genuine Dellorto short fuel banjo bolt.
For use with 6mm pipe fitting banjos only.
Dimensions:
- 18.2mm total length
- 10mm spanner size
- M6 thread x 1mm pitch
- 12.25mm threaded length
Some bolts may come without a slot drive cut into them as shown in the photo.
2134.01.0800 Cohline Carburettor – Stainless Steel Braided Fuel Hose 9.5mm
Cohline stainless over braid 9.5mm bore x 17mm fuel injection hose
Inside layer NBR, Textile brading, Outer layer CR (Abrasion resistant rubber) DIN 73379-2A (edition 11/97) with Stainless Steel braiding.
Suitable for commercial fuel including Super grades and E10.
Sold per meter, max continous length 20mtr
PVO201-45 Twin Weber 45 DCOE carburettor kit Volvo B18/20
A Weber performance kit to allow fitment of 2 x Genuine Spanish Weber 45DCOE carburettors to the Volvo B18/20 engines.
The carburettors come with a stock jetting found here:Â 19600.060
Kit contains:
- 2 x Weber 45DCOE carburettors
- 1 x Intake Manifold
- 1 x linkage set
- Softmounts, studs, nuts, washers etc.